| |
NHK sliding door specification
model |
NHK 90 |
NHK 150 |
Sliding method |
Single leaf |
Double leaf |
Single leaf |
Double leaf |
Door leaf weight |
Below
90k g |
Below
90k g × 2 |
Below 150Kg |
Below 150Kg ×2 |
Door leaf width mm |
700 ～ 1250mm |
Driving beam width(mm) |
1400 ～ 3000 |
2800 ～ 5000 |
Opening speed |
200 ～ 500mm /sec |
Closing Speed CM/SEC |
200 ～ 400mm /sec |
Door holding time |
1 ～ 9 sec (adjustable) |
Controller |
Microcomputer proccessor |
motor |
DC24V60W brushless motor |
Consume power |
75w |
Pc voltage |
AC200 ～ 240V 50Hz / AC110V |
Temperature around |
-20 ～ 50 ℃ |
Basic action |
AC→ON→open slowly→stop slowly→close→close quicly→brake→close slowly→push→air-tight(close state) |
|
 |
Accessories brief
Motor
1.The sliding door use Brushless DC motor :60W
2. moment of force is strong and noise is low. when started.
3. with survey function of optics ruler,high efficiency close-route control and with stable revolvin g torsion and speed.
4. overload protective device prevent from being wear and obstarcle . Controller:
1. with long serve life, controller Uses the advanced CPU chip processing control system. Operating parameter be demonstrated in digital.
2. Parameter is adjusted conveniently and nimberly.
3. can link to entrance manage system
The hoisting mechanisms
1. advanced structural design , hoop always move on orbital .
2. convenient altitude control
3. The guards equipment prevented the door from derailed .
4. according to your need, we make hoop of different material .
5. with high intensity, even load, steady move , the hoisting mechanisms can bear 180 kilogram .
The timing belt
The tooth timing belt is of high Intensity and Wearability.
Rear wheel device
Easy to adjust between loose and tight, it prevents the belt vibration practically |
|
